Cubby TCG Drawer Catalog 2

Über dieses Modell

Card Catalog 2 Electric Boogaloo!! With over a year of using my previous Cubby TCG Drawer Catalog, I started feeling the pains of my previous design. Namely that my original design limited to only 8 drawers per Ikea Kallax cubby. I had outgrown that few drawers so it was back to the drawing board with some changes. Features: A Standard-sized TCG card catalog unit with options to connect additional copies to create your own personal card catalog Connect 12 (in a 4 x 3 pattern) Cubby TCG Drawer Catalogs to fill a Ikea Kallax shelf cubby A dovetail rail prevents drawers from twisting or sagging as the drawer is pulled out Drawers are full removable for transporting your cards around Notes: Drawers fit Standard-sized TCG cards with or without outer sleeves Drawers will NOT fit Top Loaders, Deck Boxes, or Oversized cards Fits roughly 575 unsleeved cards Designs are a tight fit for the Catalog Connector Pins and Handle. They are friction fit to help disassemble if desired. What you need: 1 x Catalog print (or both p1 and p2 pre-cut prints) 1 x Drawer print (or both p1 and p2 pre-cut prints) 1 x Handle print (Optional) 5 x Pegs for Split Printing (Optional) Super Glue for Split Printing (Optional) Catalog Connector Pins (Optional) Card Dividers Curious about what I changed? Removed the magnets to help closure. They were not as effective as I hoped during my initial design especially with fully loaded drawers. Increased the amount of drawers per Kallax cubby. Noticed a lot of wasted space in my original design out of concern for strength and accommodating a large dovetail. Gained some card storage space by making the back of the drawer the back wall of the catalog, also makes it easier to print and put the drawers back Stronger handle. I snapped a handle once and it was annoying to replace.