OEM 13178813 / 13177053 Opel Vauxhall Zafira B Rear Seat Handle Retainer Clip – 3rd Row Folding Seat Handle Insert | STL 3D Print

Informazioni su questo modello

Repair the folding rear-seat handle on your Opel / Vauxhall Zafira B without replacing the complete seat handle or seat mechanism. This is a 3D-printable replacement retaining clip / insert for the rear folding-seat release handle on the Opel / Vauxhall Zafira B. The original clip is a small plastic component that holds the rear seat-back release handle correctly in position. After years of use it can become brittle, cracked, broken or completely lost, leaving the handle loose or difficult to operate. The genuine Zafira B parts catalog identifies GM 13178813 as the anthracite rear seat-back handle clip, with production number 13177053. The catalog specifies four clips in the relevant rear-seat assembly. OEM / Reference Numbers GM / Opel OEM: 13178813 Production Number: 13177053 Reference: 2316007 / 23 16 007 GM 13178813 is also sold specifically as a third-row rear seat handle retaining clip for Zafira applications. Designed For Opel Zafira B Vauxhall Zafira B Application: Rear folding seat handle 3rd-row seat release handle Seat-back handle retaining clip / insert Why This Model Is Worth Buying ✔ OEM reference 13178813 ✔ Designed specifically for Opel / Vauxhall Zafira B ✔ Replaces a broken or missing rear-seat handle retainer ✔ Restores the correct position of the folding-seat release handle ✔ Ideal for the third-row folding seat system ✔ Saves the original handle and seat mechanism ✔ No need to replace the complete rear-seat handle assembly ✔ Perfect solution for a tiny OEM plastic part that is easy to lose or break ✔ Fast and inexpensive to 3D print ✔ Very little filament required ✔ Ideal for workshops and Zafira owners ✔ Print several clips at once and keep spares ✔ Keep the STL permanently as a digital replacement part Typical Failure The third-row seats in the Zafira B are frequently folded and unfolded, putting repeated stress on the small handle-retaining components. Over time, the original clip can: crack, split, lose its retaining force, break during seat disassembly, fall out, or disappear completely. Owners specifically report these clips as the components that hold the seat handles in place, making the small retainer an important part of the folding-seat mechanism. Repair Only the Failed Part A broken clip does not necessarily mean that the seat handle or release mechanism itself needs replacement. With this model you can: retain the original rear seat, reuse the original release handle, replace only the damaged retainer, restore the factory-style installation, avoid searching for a complete used handle assembly. This is exactly the kind of small automotive component where 3D printing offers a quick and economical repair. Recommended Material Because the clip must retain its shape while having enough toughness for installation: PA / Nylon – BEST CHOICE ⭐⭐⭐⭐⭐ Excellent toughness and fatigue resistance. PETG – ⭐⭐⭐⭐ Very practical option with useful flexibility. ASA – ⭐⭐⭐⭐ Strong and highly suitable for hot automotive interiors. ABS – ⭐⭐⭐⭐ Good temperature resistance and durability. PLA can work for testing, but a tougher and more heat-resistant material is recommended for long-term use. Suggested Print Settings A good starting point: Layer height: 0.12–0.20 mm Walls: 5–6 Infill: 80–100% Scale: 100% Supports: depending on orientation Recommended material: PA / PETG / ASA For this small snap-fit component, dimensional accuracy and layer orientation are especially important. Installation Remove any broken remains of the original retainer. Check that the seat handle and release mechanism are intact. Install the printed replacement clip. Refit the handle. Operate the folding mechanism several times before normal use. After installation, verify that: ✔ The handle remains securely retained ✔ The release handle moves freely ✔ The seat unlocks correctly ✔ The mechanism returns normally ✔ The printed clip does not crack or deform Important Fitment Notice Please verify: GM 13178813 Production No. 13177053 and compare the geometry shown in the listing with your original part before purchase. The OEM catalog identifies 13178813 specifically as the rear-seat-back handle clip for Zafira B. Digital Product THIS LISTING IS FOR DIGITAL 3D PRINTING FILES ONLY. No physical clip, seat handle, seat mechanism or other vehicle component is included. ⭐ CUSTOMIZATION AVAILABLE THIS MODEL CAN BE MODIFIED / CUSTOMIZED TO YOUR REQUEST. Need tighter retention, reinforced locking areas, modified tolerances or another discontinued Opel / Vauxhall seat component? Contact me — I can customize the model according to your requirements.