Opel Ascona C Door Lock Barrel Actuating Tab – GM 90055697 / 133909 | STL 3D Print

Über dieses Modell

A 3D-printable replacement actuating tab for the door lock cylinder / lock barrel of the Opel Ascona C. This small component is part of the mechanical connection between the door lock cylinder and the internal door locking mechanism. When the original plastic tab becomes brittle, worn or broken after decades of use, the key cylinder may still turn but no longer operate the door lock correctly. This replacement allows the original lock assembly to be repaired without replacing the complete door lock cylinder. COMPATIBILITY Designed for: Opel Ascona C Door lock cylinder / lock barrel mechanism OEM / OE REFERENCES GM: 90055697 Opel: 01 33 909 / 133909 Parts references identify 90055697 for Ascona C as a door-lock controller/lever component, while specialist classic Opel suppliers describe it specifically as a Door Lock Barrel Actuating Tab. ALSO KNOWN AS Door Lock Barrel Actuating Tab Door Lock Cylinder Actuator Lock Cylinder Tab Lock Barrel Driver Door Lock Lever Betätigungslasche Türschließzylinder Türschließzylinder Lasche Schließzylinder Mitnehmer FUNCTION The part transfers movement from the door lock cylinder to the internal locking mechanism. When the key is turned, this component helps: ✔ Transmit the movement of the lock barrel ✔ Engage the mechanical door lock linkage ✔ Restore correct locking and unlocking operation ✔ Keep the original lock cylinder in service COMMON FAILURE SYMPTOMS This replacement may be useful when: The key turns but does not operate the door lock Lock barrel rotates without correctly engaging the mechanism Original actuating tab is cracked Plastic component has snapped Original part was lost during lock disassembly Complete replacement lock assemblies are difficult to source FEATURES ✔ Replacement for GM 90055697 ✔ Designed for Opel Ascona C ✔ Restores the mechanical door-lock connection ✔ Suitable for classic Opel restoration ✔ Saves replacing an otherwise functional lock cylinder ✔ Small and economical part to print ✔ Useful digital spare for rare vintage components ✔ Can be reproduced whenever required PRINTING RECOMMENDATION Because this is a small mechanically loaded component, a tough engineering filament is recommended. Suitable materials: PA / Nylon PA-CF PETG ABS / ASA For best durability: Use several walls / perimeters Use high infill Ensure strong layer adhesion Orient the part according to the direction of mechanical load Check dimensions carefully before assembly IMPORTANT FITMENT NOTE Please verify GM 90055697 and compare the model geometry with your original component before printing. This part should not be confused with GM 90053650, which is another lever in the Ascona C door-lock cylinder mechanism. Classic Opel locks apparently needed multiple tiny plastic intermediaries, because one potential failure point was clearly not ambitious enough. CUSTOM MODIFICATIONS ARE AVAILABLE ON REQUEST — THE MODEL CAN BE MODIFIED, RESIZED OR ADAPTED TO YOUR SPECIFIC REQUIREMENTS. DIGITAL PRODUCT ONLY This listing contains a digital STL file for 3D printing only. No physical lock cylinder, key, door lock, retaining clips or other vehicle components are included. Opel, GM, Ascona and associated part numbers are used only to describe compatibility and reference application.