Skull magnet

About this model

Spooky little skull fridge magnet with a recessed 5.5 mm diameter pocket for a 5 mm × 2 mm neodymium disc. Designed to print flat on the back, no supports, magnet glued flush after printing. Description: Decorate your fridge, locker, or tool cabinet with a compact Halloween skull magnet. The back has a single cylindrical pocket: Diameter: 5.5 mm (0.5 mm clearance for a 5 mm magnet + glue) Depth: 2.2 mm (magnet sits slightly recessed so it doesn’t rock on the fridge) Magnet: 5 mm diameter × 2 mm thick neodymium disc (N35 or stronger) Skull is a stylized Halloween design — hollow eye sockets, nasal cavity, toothy grin — not a full anatomical skull. Size is fridge-magnet scale . Print it in bone white, glow-in-the-dark, or orange PLA. Print settings (suggested): Layer height: 0.16–0.20 mm Walls: 3 Infill: 15–20% Supports: none (print magnet-side down) Orientation: back flat on the bed so the magnet pocket faces the build plate Material: PLA or PETG Assembly: Print. Clean the pocket if needed. Add a drop of CA glue or E6000. Press in the 5×2 mm magnet (check polarity if you want it to stack with other magnets). Let cure. Notes: 5.5 mm hole is intentional — 5.0 mm is usually too tight after printing. Do not pause-and-embed unless you change the pocket to a closed cavity; this version is glue-in after print. Keep magnets away from kids and electronics. Happy Halloween. #CULTSOWEEN