Pumpkin Tealight Lantern with Carved Face (2 Faces + Lid)

About this model

This is a ribbed pumpkin lantern with a carved jack-o'-lantern face. Put a tealight inside and the eyes, nose and grin glow in the dark, just like a real carved pumpkin, but without the mess. The top is open, so you can light the candle easily and the heat can escape. For LED tealights, there is a matching lid with a twisted stem that turns it into a closed pumpkin. ### Included | Part | Size | Description | |---|---|---| | Body – classic face | Ø 100 × 69 mm | Triangle eyes and nose, toothy grin | | Body – spooky face | Ø 100 × 69 mm | Angry eyes and a jagged, stitched mouth | | Lid with stem | Ø 69 × 29 mm | Seats in a cone on top of either body (LED tealights only) | With the lid on, the pumpkin is about 96 mm tall. ### Features - Prints in one piece without supports. The shape and face are designed so that no overhang is steeper than about 45° and no hole has a sagging top edge. - Fits standard tealights (Ø 38–39 mm). A centering ring holds the candle in place. - Raised ridges under the tealight leave an air gap between the hot cup and the plastic - Large top opening (Ø 60 mm) for easy lighting with a long lighter or match - The lid centres itself in a 45° seat and doesn't slide off ### Safety Candles are an open flame. Never leave a burning candle unattended, and keep the lantern away from flammable materials. Always use tealights in their metal cup. Use the lid with LED tealights only, never with a real flame. PLA can soften from the heat of a real candle, so use PETG/ASA or LED tealights. Printed parts are not certified fire-safe; use at your own risk.