Flexi Christmas Dragon - Santa Hat Articulated Print-in-Place Toy, No Supports

About this model

The Flexi Dragon dressed for Christmas: a floppy Santa hat with fur trim and a big pom-pom, and a sprig of holly with three berries on the tip of the tail. Bat wings, claws and a wiggly articulated body - a fun stocking stuffer, tree-side decoration or desk fidget. Print-in-place: comes off the bed fully articulated. No supports, no assembly, no glue. **Specs** - Size: 203 x 129 x 20 mm (9 segments, 8 joints, each turns up to ±20°) - Joints: support-free 55° bicone pins with 0.4 mm clearance, captive (they cannot pop out) - Verified geometry: every joint checked for clearance, rotation and pull-out before export - Needs a 220 mm bed or larger (Ender 3, Bambu A1/P1/X1, Prusa MK4). Scaling below 90 % is not recommended: it reduces the joint clearance Two files included: STANDARD (0.40 mm joint clearance) and LOOSE (0.50 mm) for printers that over-extrude or have elephant's foot. Both versions were verified the same way. **Colors**: each segment is a single body; the colors in the images are a suggestion. Print it in green and paint the hat, or color the hat, trim and holly with the paint tool of your slicer (Bambu Studio, OrcaSlicer, PrusaSlicer) for a multicolor print. Want more? All 26 flexi animals (including the classic Flexi Dragon) are in the "Flexi Mega Pack" on the Arcode3D profile for EUR 12.99. ES: el Flexi Dragon vestido para Navidad: gorro de Papá Noel con piel y pompón, y una rama de acebo con bayas en la cola. Se imprime articulado en una sola pieza, sin soportes ni armado. Incluye versión estándar y versión con más holgura. Made with AI: the geometry is generated by our own parametric code written with an AI agent; fit and clearances checked by software. Images are renders (printed photos coming soon).