Rotating Hybrid Stickends

About this model

Print in LW TPU, Insert a 3x8x4 Bearing with a print pause at the unsuported overhang. Use a M3 Hex Screw and bolts as a Stick. Bearings: NSK 693ZZ 3x8x4 For best results only print one piece at a time or use the "sequential" function. Print the lower part containing the bearing at a non foaming temperature and higher extrusion factor. Transition the Temperature and extrusion factor to max foaming over a couple layers, starting 3 layers after the bearing insertion using the layer gcode. M221 S95 for Extrusion Multiplyer M104 S225 for Hotend Temp.