Haunted Mill Lantern with Turning Sails - Print in Place - 3D Print STL

About this model

**Haunted Mill Lantern with Turning Sails - Print in Place - ready-to-print STL.** Gothic stone mill tower that lights up and whose four lattice sails really turn: the whole sail assembly prints already mounted on a captured cone bearing, so a flick sets it spinning. Nine lipped stone courses, three pointed gothic windows with mullions and sills, a strapped and studded plank door, shingled cap roof with an iron finial, and two bats perched on the eaves - Watertight, manifold single solid (checked), 36,722 triangles - Three sizes in one download: 100% (112 x 114 x 173 mm), 125% and 80%, all in millimetres - Print notes: Prints in one piece with the sail assembly already on its 0.35 mm cone bearing - do not merge or repair the two shells into one solid. Hollow with an open base: drop it over a 37 mm LED tea light and the windows and door glow. No supports: the sails are set as an X so every arm stays inside 45 degrees, and the cap roof is steeper than that. 0.16 mm layers, 3 perimeters. Free the sails with a gentle flick after printing. - Halloween mantel, porch and table lantern - and a working desk toy - No brands or logos **AI disclosure:** this product was procedurally generated in Blender with Python scripts written with the help of an AI assistant (Claude, connected through MCP). The publisher chose, directed and reviewed the design. No third-party meshes, textures, brands or logos were used.